Our Concrete Services in Ocala, FL

Most residential concrete driveways and patios are completed in 1–3 days, depending on size and complexity. A standard single-car driveway typically takes 1 day to form and pour. Larger driveways, decorative patios, or stamped projects may require 2–3 days including prep, forming, pouring, and finishing. Commercial projects and foundation slabs are scheduled individually based on scope.

Concrete begins hardening within hours, but reaching full structural strength is a gradual process. You can typically walk on it after 24–48 hours. Light vehicle traffic (passenger cars) is generally safe after 7 days. Full cure — when concrete reaches its maximum rated strength — takes approximately 28 days. We recommend waiting the full 28 days before parking heavy vehicles like RVs or trucks. In Florida's warm climate, curing often progresses faster than in cooler states.

Pricing depends on square footage, project complexity, site preparation required, and finish type. As general benchmarks:

• • Plain broom-finish concrete: $6–$10 per sq ft
• • Stamped or decorative concrete: $12–$20+ per sq ft
• • Pool deck resurfacing: $4–$8 per sq ft
• • Foundation slabs: Quoted individually by project specs

The best way to get an accurate price is a free on-site estimate — we assess your specific site conditions, access, sub-base needs, and your preferred finish. Call (352) 581-9150 or request a free estimate online.

Permit requirements vary by project type and jurisdiction. In Marion County and Ocala:

• • Driveways & patios: Typically do not require a permit for residential replacements, but may require one for new construction or if drainage is affected.
• • Foundation slabs: Almost always require a building permit and engineer-stamped drawings.
• • Commercial projects: Permits are required in virtually all cases.

We help our clients navigate the permitting process and can pull required permits on your behalf as part of the project. We never start work that requires a permit without one in hand.

Regular (plain) concrete is poured and finished with a broom or smooth trowel — functional, durable, and cost-effective. Stamped concrete takes it further: after pouring, rubber stamps are pressed into the surface while it's still wet to create realistic patterns that mimic brick, stone, slate, cobblestone, or wood. Color pigment is added to the mix or applied as a release agent, and the finished surface is sealed with a UV-resistant sealer. The result looks far more expensive than it costs — and it's one continuous solid surface with no weeds or shifting.

Florida's intense UV rays and heavy rains make sealing particularly important. Here's what we recommend:

• • Re-seal every 2–3 years to protect color (especially stamped) and prevent moisture intrusion
• • Clean regularly with a pressure washer to remove mold, mildew, and stains
• • Address cracks early — small hairline cracks can be filled before they grow
• • Keep tree roots in check — Florida's fast-growing trees are a common cause of concrete uplift

We offer sealing and maintenance services — ask us about a maintenance plan when you book your free estimate.

Many concrete problems can be repaired without full replacement — saving you significant cost. Hairline and moderate cracks can be filled and sealed. Sunken sections can be raised with mudjacking or foam injection. Spalling and surface damage can be corrected with a concrete overlay or resurfacing system. Trip hazards from root uplift can often be ground flush rather than replaced. We always assess repair vs. replacement honestly and recommend the most cost-effective solution.

Yes. Concrete Designs FL LLC is a fully licensed and insured concrete contractor operating in compliance with Florida state contractor licensing requirements. We carry general liability insurance and workers' compensation coverage on every project. We're happy to provide proof of insurance and licensing upon request — and we strongly recommend you ask any contractor you hire to do the same.